Solar Package

There is nothing worse than having to run around to find installation products to install solar thermal hot water systes.

We think we offer the most simple, complete, quality, inexpensive and transparent pricing system solar hot water package on the market today, making a competent installer/diy installer perfectly capable of installing our system in 1-2 days, with everthing supplied as required.

This kit includes the cylinder, controls, solar panel pipework, insulation, fittings, solar mixing valve, pump station, antifreeze etc.

For most domestic installations, (up to 60 tubes) we would recommend dn16 stainless steel pipes with factory fitted insulation and sensor lead, more expensive but for speed and less risk of leaks this pipe is far superior than using copper with joints.

We can offer a full solar package with installation instructions as below, or any combination you require .

Just notify us with what type of size and  system you require - E.G. (some suggestions)-

 

 

  

A.C. controller with pump station and a  2m2 evacuated Chinese panel with DN16 Stainless Steel Pipe

Chinese imported 20 tube heat pipe evacuated solar thermal panel (2m2)

Resol controller flowCon BSL pump station Full Kit inc sensors

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

160 litre twin coil vented cylinder

Solar mixing valve 22mm

15 metres of Dn16 Stainless Steel Pipe, with pre-formed insulation and sensor lead included. 

Roll of tape

Selkirk SolarDek high temperature roof flashing x 2

Adjustable pipe cutter

Coach screws to secure pipe

Connectors and fittings for manifold and pump station 

1/2in to 22mm Compression Tee

Immersion sleeve for sensor

3 meters 2 core bell wire

3 amp terminal block 10 way

 

 

Total Price = £1785.00 + V.A.T. + Carriage

30 Tube System as above (3m2)

Total Price = £2052.00 + V.A.T. + Carriage 

 

 

 

 

A.C. controller with pump station and a  2m2 Thermomax panel with DN16 Stainless Steel Pipe

Thermomax 20 tube heat pipe evacuated solar thermal panel (2m2) 

Resol controller flowCon BSL pump station Full Kit inc sensors

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

160 litre twin coil vented cylinder

Solar mixing valve 22mm

15 metres of Dn16 Stainless Steel Pipe, with pre-formed insulation and sensor lead included.

Roll of tape

Selkirk SolarDek high temperature roof flashing x 2

Adjustable pipe cutter

Coach screws to secure pipe

Connectors and fittings for manifold and pump station

3 meters of 2 core bell wire

3 amp terminal block 10 way

 

 

 

Total Price = £2338.00 + V.A.T. + Carriage 

30 Tube System as above (3m2)

Total Price = £2561.00 + V.A.T. + Carriage   

 

 

 

30 Watt P.V with a 12 Volt D.C. controller, with pump station and a  2m2 evacuated Chinese panel with DN16 Stainless Steel Pipe

Chinese imported 20 tube heat pipe evacuated solar thermal panel (2m2)

Resol 12 Volt D.C. controller flowCon B pump station Full Kit inc sensors

30 Watt P.V. panel

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

160 litre twin coil vented cylinder

Solar mixing valve 22mm

15 metres of Dn16 Stainless Steel Pipe, with pre-formed insulation and sensor lead included.

Roll of tape

Selkirk SolarDek high temperature roof flashing x 2

Adjustable pipe cutter

Coach screws to secure pipe

Connectors and fittings for manifold and pump station 

15 meters 2 core bell wire

3 amp term block 10 way

1/2 in to 22mm comp tee

Immersion sleeve for sensor

Tube of adhesive 

 

  

Total Price = £2105.00 + V.A.T. + Carriage

30 Tube System as above (3m2)

Total Price = £2375.00 + V.A.T. + Carriage

 

30 Watt P.V with a 12 Volt D.C. controller, with pump station and a Thermomax 2m2 evacuated solar panel with DN16 Stainless Steel Pipe

Thermomax  20 tube heat pipe evacuated solar thermal panel (2m2)

Resol 12 Volt D.C. controller flowCon B pump station Full Kit inc sensors

30 Watt P.V. panel

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

160 litre twin coil vented cylinder

Solar mixing valve 22mm

15 metres of Dn16 Stainless Steel Pipe, with pre-formed insulation and sensor lead included.

Roll of tape

Selkirk SolarDek high temperature roof flashing x 2

Adjustable pipe cutter

Coach screws to secure pipe

Connectors and fittings for manifold and pump station

15 meters 2 core bell wire

Tube of adhesive 

3 amp terminal block 10 way

 

Total Price = £2670.00 + V.A.T. + Carriage 

30 Tube System as above (3m2)

Total Price = £2890.00 + V.A.T. + Carriage 

 

Pre-Heat to combi with a A.C. controller with pump station and a imported Chinese 2m2 evacuated  panel with DN16 Stainless Steel

Chinese 20 tube heat pipe evacuated solar thermal panel (2m2)

Resol controller flowCon BSL pump station Full Kit inc sensors

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

150 litre unvented powerflow 2000 solar cylinder c/with 12 litre expansion vessell and full safety controls

Solar mixing valve 22mm

15 metres of Dn16 Stainless Steel Pipe, with pre-formed insulation and sensor lead included. 

Roll of tape

Selkirk SolarDek high temperature roof flashing x 2

Adjustable pipe cutter

Coach screws to secure pipe

Stainless steel connectors and fittings for manifold and pump station

22mm to 15mm compression olive reducers x 5

1/2 inch to 22mm compression tee

Immersion sleeve for sensor

Honneywell diverter valve

Honneywell junction box

15mm thermostatic mixing valve 

3 meters of 2 core bell wire

3 amp terminal block 10 way

 

 

Total Price = £2662 + V.A.T. + Carriage 

30 Tube System as above (3m2)

Total Price = £2931 + V.A.T. + Carriage 

 

 

Pre-Heat to combi with a A.C. controller with pump station and a Thermomax  2m2 evacuated  panel with DN16 Stainless Steel Pipe

Thermomax 20 tube heat pipe evacuated solar thermal panel (2m2)

Resol controller flowCon BSL pump station Full Kit inc sensors

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

150 litre unvented powerflow 2000 solar cylinder c/with 12ltr expansion vessell and full safety controls

Solar mixing valve 22mm

15 metres of Dn16 Stainless Steel Pipe, with pre-formed insulation and sensor lead included. 

Roll of tape

Selkirk SolarDek high temperature roof flashing x 2

Adjustable pipe cutter

Coach screws to secure pipe

Stainless steel connectors and fittings

1/2 inch to 22mm compression tee

Immersion sleeve for sensor

22mm to 15mm reducing olives x 5

Honneywell diverter valve

Honneywell junction box

15mm thermostatic mixing valve

3 meters of 2 core bell wire

3 amp terminal block 10 way

 

 

Total Price = £ 3163 + V.A.T. + Carriage

 30 Tube System as above (3m2)

Total Price = £ 3383 + V.A.T. + Carriage 

 

 

Pre-Heat to combi with a 30 Watt p.v. panel, 12 Volt D.C. controller, pump station and a  2m2 evacuated Chinese panel with DN16 Stainless Steel Pipe.

Chinese imported 20 tube heat pipe evacuated solar thermal panel (2m2)

Resol 12 Volt D.C. controller flowCon B pump station Full Kit inc sensors

30 Watt P.V. panel

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

150 litre unvented powerflow 2000 solar cylinder c/with 12 litre expansion vessell and full safety controls

15 meters of dn16 stainless steel pipe with pre-formed insulation and sensor lead included

Tube of adhesive

3 meters of 2 core bell wire

3 amp terminal block 10 way

1/2 inch to 22mm compression tee

Immersion sleeve for sensor

22mm to 15mm reducing olives x 5

Honneywell diverter valve

Honneywell junction box

15mm thermostatic mixing valve

Adjustable pipe cutter

Roll of tape

Selkirk solardek high temperature roof flashing x 2 

Solar mixing valve 22mm

Coach screws to secure pipe

Stainless steel connectors and fittings

 

Total Price = £ 2870 + V.A.T. + Carriage

 30 Tube System as above (3m2)

Total Price = £ 3138 + V.A.T. + Carriage 

 

 

Pre-Heat to combi with a 30 Watt p.v. panel, 12 Volt D.C. controller, pump station and a  2m2 evacuated Thermomax panel with DN16 Stainless Steel Pipe.

Thermomax 20 tube heat pipe evacuated solar thermal panel (2m2)

Resol 12 Volt D.C. controller flowCon B pump station Full Kit inc sensors

30 Watt P.V. panel

18 Litre solar expansion vessel with fixing kit

10 litre ready mixed Tyfocor LS heat transfer fluid

Doser to inject chemical

150 litre unvented powerflow 2000 solar cylinder c/with 12 litre expansion vessell and full safety controls

15 meters of dn16 stainless steel pipe with pre-formed insulation and sensor lead included

Tube of adhesive

3 meters of 2 core bell wire

3 amp terminal block 10 way

1/2 inch to 22mm compression tee

Immersion sleeve for sensor

22mm to 15mm reducing olives x 5

Honneywell diverter valve

Honneywell junction box

15mm thermostatic mixing valve

Adjustable pipe cutter

Roll of tape

Selkirk solardek high temperature roof flashing x 2

Solar mixing valve 22mm

Coach screws to secure pipe

Stainless steel connectors and fittings

 

Total Price = £ 3434 + V.A.T. + Carriage

 30 Tube System as above (3m2)

Total Price = £ 3654 + V.A.T. + Carriage